jb JRB - 2000H at 105°C Radial Aluminum Electrolytic Capacitors

We would like to share the most common Radial Aluminum Electrolytic to our customers.
Please find below table for reference.

1000uF 10V +/-20% D*L: 8*14mm P: 3.5mm 1000H at 105'C Bulk RoHS

1000uF 16V +/-20% D*L: 10*16mm P: 5mm 2000H at 105'C Bulk RoHS

1000uF 25V +/-20% D*L: 10*20mm P: 5mm 2000H at 105'C Bulk RoHS

1000uF 35V +/-20% D*L: 13*20mm P: 5mm 2000H at 105'C Bulk RoHS

100uF 160V +/-20% D*L: 13*25mm P: 5mm 2000H at 105'C Bulk RoHS

2200uF 16V +/-20% D*L: 10*20mm P: 5mm 2000H at 105'C Bulk RoHS

2200uF 25V +/-20% D*L: 13*25mm P: 5mm 2000H at 105'C Bulk RoHS

2200uF 35V +/-20% D*L: 16*25mm P: 7.5mm 2000H at 105'C Bulk RoHS

220uF 16V +/-20% D*L: 6.3*11mm P: 2.5mm 1000H at 105'C Bulk RoHS

220uF 25V +/-20% D*L: 8*11.5mm P: 3.5mm 1000H at 105'C Bulk RoHS

220uF 35V +/-20% D*L: 8*11.5mm P: 3.5mm 1000H at 105'C Bulk RoHS

3300uF 50V +/-20% D*L: 18*40mm P: 7.5mm 2000H at 105'C Bulk RoHS

330uF 25V +/-20% D*L: 8*11.5mm P: 3.5mm 1000H at 105'C Bulk RoHS

470uF 16V +/-20% D*L: 8*11.5mm P: 3.5mm 1000H at 105'C Bulk RoHS

470uF 25V +/-20% D*L: 8*16mm P: 3.5mm 1000H at 105'C Bulk RoHS

470uF 35V +/-20% D*L: 10*16mm P: 5mm 2000H at 105'C Bulk RoHS

47uF 160V +/-20% D*L: 10*20mm P: 5mm 2000H at 105'C Bulk RoHS

47uF 63V +/-20% D*L: 6.3*11mm P: 2.5mm 1000H at 105'C Bulk RoHS

More information please check below link:
http://www.jbcapacitors.com/Aluminum-Electrolytic-Capacitors/JRB-105-Radial-Aluminum-Electrolytic-Capacitors.html

jb Aluminum Electrolytic Capacitor - JNE Features、Construction

jb Aluminum Electrolytic Capacitor - JNE

Features

  • Load life of 2000 hours at 105°C
  • High ripple current
  • Smaller size
  • PCB Mounting

Construction

  • Charge/discharge-proof, polar
  • Aluminum case, fully insulated with PVC
  • Version with PET insulation available
  • Version with additional PET insulation cap on terminal side
  • available for insulating the capacitor from the PCB
  • Snap-in solder pins to hold component in place on PC-board
  • Minus pole marking on case surface
  • Minus pole not insulated from case
  • Overload protection by safety vent on the base